Multi-Barrel Cluster Obsidian TNT Cannon

A multi-barrel obsidian artillery battery that launches a concentrated volley of TNT across long distances.

Multi-Barrel Cluster Obsidian TNT Cannon
Download schematicView in 3DFree .schematic file on 9Minecraft Schematics · works with WorldEdit and Litematica

What you are building

The Multi-Barrel Cluster Obsidian TNT Cannon is a heavy-duty siege weapon built to fire a broadside volley of explosive projectiles simultaneously. Constructed primarily from obsidian, the massive frame shields the inner redstone wiring and surrounding area against accidental misfires or premature detonations. It is an ideal installation for base defense, faction wars, or clearing out wide surface areas.
Mechanics unchanged. The file is from an older version, but this kind of farm relies on mechanics that have stayed the same for years. Test it in a creative world before you commit resources.

Never place TNT directly over the water source blocks at the rear of the trenches, as cutting off water flow will cause the propellant to destroy the surrounding mechanism.

Adjust the delay settings on the repeater chain running to the projectile TNT to fine-tune your projectile's flight time and detonation altitude.

Materials 1,246 blocks · 11 types

  • Obsidian67010 stacks + 30
  • Dirt1772 stacks + 49
  • Redstone Wire1141 stack + 50
  • Repeater1081 stack + 44
  • Tnt841 stack + 20
  • Grass Block62
  • Water12
  • Stone Slab12
  • Dandelion3
  • Grass3
  • Oak Button1

How it works

The cannon operates using parallel water-filled firing trenches arranged across two distinct firing tiers. Water streams prevent the propellant TNT from damaging the cannon structure when ignited. When activated by an oak button, redstone wire delivers power directly to the propellant charges while a delay circuit of redstone repeaters holds back signal transmission to the projectile TNT resting on stone slabs at the end of each barrel. Once the propellant explodes, it launches the primed projectile TNT forward in a concentrated cluster just before detonating on target.

How to use it

To operate the cannon, place TNT blocks along the water channels, taking care to leave the water source block unobstructed at the back of each trench, and place the projectile TNT blocks onto the stone slabs at the muzzle. Press the oak button on the control terminal to ignite the propellant volley and launch the payload. Manually reload the TNT into every trench before firing another volley.

Lay the Foundation and Base Outlines

Layers 1–2 of 9

Clear a level area measuring 10 by 24 blocks. Build the bottom floor using dirt and grass blocks, then trace the perimeter and interior channel dividers using obsidian to establish the foundation of the lower firing deck.

Multi-Barrel Cluster Obsidian TNT Cannon - step 1: Lay the Foundation and Base Outlines

Assemble the Lower Barrel and Mid Deck

Layers 3–5 of 9

Extend the obsidian sidewalls upward and place water source blocks along the rear of the lower channel so water flows toward the muzzle. Place a stone slab at the front exit, load the initial row of TNT, and seal the tier with a solid obsidian ceiling to form the platform for the upper deck.

Multi-Barrel Cluster Obsidian TNT Cannon - step 2: Assemble the Lower Barrel and Mid Deck

Construct the Upper Array and Wire Redstone

Layers 6–9 of 9

Build the upper battery of parallel obsidian firing channels with archways at the rear. Lay redstone wire across the upper ledges, install repeater lines along the sides to handle the ignition delay, add the oak button at the rear firing post, and load the remaining TNT charges into the launch bays.

Multi-Barrel Cluster Obsidian TNT Cannon - step 3: Construct the Upper Array and Wire Redstone

Finishing touches

Before loading live explosive blocks into the cannon, inspect every trench to ensure water is flowing fully underneath the propellant locations. Fire a test round in a creative test world first to confirm that the repeater delays match your desired range and to ensure no TNT detonates prematurely inside the obsidian barrels.

Frequently Asked Questions

Why is the cannon built almost entirely out of obsidian?

Obsidian has extremely high blast resistance, ensuring that even if a timing error occurs, the primary structure of the cannon remains intact.

Which game version is this cannon compatible with?

This design comes from an older file format, but it relies on classic redstone and TNT mechanics that have stayed the same for years. You should test it in a creative world before committing survival resources.

#tnt cannon#redstone#siege weapon#obsidian#artillery

Download schematicView in 3DFree .schematic file on 9Minecraft Schematics · works with WorldEdit and Litematica

You May Also Like