Automatic Flying Machine Bamboo Farm

An automated bamboo farm using a slime-block flying machine to sweep stalks into a hopper-fed collection rail system.

Automatic Flying Machine Bamboo Farm
Download schematicView in 3DFree .schem file on 9Minecraft Schematics · works with WorldEdit and Litematica

What you are building

This automatic farm provides a sustainable supply of bamboo for crafting scaffolding, sticks, bamboo wood sets, and endless furnace fuel. By using a bidirectional slime flying machine instead of hundreds of individual pistons, this design efficiently harvests a massive planting area with minimal redstone overhead.

Because the footprint requires flat ground, it is best constructed near your main survival base or smelting hub. Clear out an open 27 by 18 block area so the flying machine has plenty of unobstructed travel room across the bamboo rows.

Built for a current version. The file was saved in a recent version of the game, so the design targets current mechanics.

Never place regular solid blocks adjacent to the path of the slime blocks. Only use immovable blocks like crying obsidian or furnaces to avoid jamming the flying machine.

Surrounding the upper harvest area with transparent glass keeps fallen items contained while letting you monitor the machine flight from outside.

Materials 2,778 blocks · 23 types

  • Bamboo98515 stacks + 25
  • Glass5789 stacks + 2
  • Grass Block5418 stacks + 29
  • Rail1923 stacks
  • Powered Rail1282 stacks
  • Cobblestone1151 stack + 51
  • Furnace791 stack + 15
  • Stone671 stack + 3
  • Redstone Torch32
  • Hopper20
  • Slime Block14
  • Observer5
  • Chest4
  • Crying Obsidian3
  • Repeater3
  • Redstone Wire3
  • Sticky Piston2
  • Stone Slab2
  • Iron Ore1
  • Lever1
  • Redstone Wall Torch1
  • Spruce Button1
  • Redstone Lamp1

How it works

Bamboo stalks grow upward on grass blocks between sweeping cycles. When triggered, a flying machine built from sticky pistons, observers, and slime blocks traverses the farm just above ground level, severing the mature stalks while leaving the planted base stalks intact to regrow.

As the stalks break, they fall onto the field where minecarts run along a powered rail and standard rail network below the planting layer. The rail system sweeps the dropped items directly into a network of hoppers and storage chests, while furnaces and crying obsidian serve as immovable boundary blocks to halt and reverse the flying sweeper safely.

How to use it

Activate the machine by flipping the control lever or pressing the spruce button at the docking station to send the flying sweeper across the crop field. Once launched, the machine shuttles back and forth automatically, clearing the stalks before docking. Retrieve all collected bamboo items directly from the collection chests positioned along the base.

Lay the Foundation and Power System

Layers 1–2 of 15

Start by outlining the lower footprint using stone and cobblestone. Dig or frame out trenches for the collection routes, placing redstone torches along the edges to provide constant power to the rail grid that will sit above.

Position your collection chests and run hoppers into them at the designated end of the run so items gathered beneath the field can drain into storage.

Automatic Flying Machine Bamboo Farm - step 1: Lay the Foundation and Power System

Place Planting Beds and Rail Grid

Layers 3–6 of 15

Install alternating lines of regular rail and powered rail over the lower foundation so collection carts can loop continuously. Directly above or between the tracks, place grass blocks for the bamboo planting beds.

Line the outer boundaries with cobblestone and furnaces. The furnaces serve as inexpensive, immovable blocks that prevent slime blocks from sticking to the outer walls. Plant your base bamboo stalks across the grass rows.

Automatic Flying Machine Bamboo Farm - step 2: Place Planting Beds and Rail Grid

Assemble the Flying Machine Sweeper

Layers 7–11 of 15

Construct the sweeping engine across the farm width using slime blocks, sticky pistons, and observers facing opposite directions to create a self-propelling carriage. Extend horizontal slime block arms outward to act as harvest blades that slice through the stalks.

At each end of the machine path, build docking stations out of crying obsidian, redstone repeaters, and redstone wire to reliably stop and re-trigger the engine for its return flight.

Automatic Flying Machine Bamboo Farm - step 3: Assemble the Flying Machine Sweeper

Enclose and Allow Bamboo to Grow

Layers 12–15 of 15

Complete the farm boundary walls using glass and remaining cobblestone to trap all flying bamboo drops inside the harvesting envelope. Ensure no movable blocks touch the slime assembly along its flight corridor.

Allow the bamboo stalks to grow upward toward their full height. Double-check that all dock triggers and reverse circuits are properly aligned before running a live sweep.

Automatic Flying Machine Bamboo Farm - step 4: Enclose and Allow Bamboo to Grow

Finishing touches

Test the flying machine once with an empty field to ensure the slime blocks glide freely without catching on side blocks or stopping mid-flight. Ensure the farm interior is adequately lit to prevent hostile mobs from spawning on any unplanted grass surfaces, and verify that all hopper minecarts continue looping across the powered rail network without stalling.

Frequently Asked Questions

Why did my flying machine break apart mid-flight?

Flying machines typically stall or separate if they grab a movable block along the perimeter, exceeding the 12-block piston push limit. Ensure only furnaces or crying obsidian touch the slime blocks along the walls.

Can the flying machine destroy the root bamboo stalk?

No, the flying sweeper operates one block above the grass surface, severing only the upper stems while preserving the bottom stalk for continuous regrowth.

#bamboo#flying machine#crop farm#automated#fuel

Download schematicView in 3DFree .schem file on 9Minecraft Schematics · works with WorldEdit and Litematica

You May Also Like